Promag LBR100 125kHz RFID - LBR200 13.56MHz MIFARE® Readers

LBR100 RFID / LBR 200 MIFARE Readers with wall mounting for European type lightswitch box

Promag LBR100 125kHz RFID reader and LBR 200 13.56MHz MIFARE reader run from any voltage from 5 to 12.5V DC and feature high read range at as low as 5 volts making it ideally suited to a wide variety of applications, particularly access control. The same basic unit can be configured to output most of the common interface formats, including Wiegand, Magstripe, and RS232 serial ASCII output, making it easy to upgrade existing installations.

New stylish housing to match modern construction
Wide Voltage range
Potted for environmental protection
Externally programmable interface
Weather resistant

Power Requirements: 5 ~ 12.5 V DC regulated, linear
Interfaces Wiegand, MSR ABA Track2 or RS232
Read Range:
LBR100 Up to 20 cm at 12.5V w/ISO card (RFID - Frequency 125KHz, ASK)
LBR200 Up to 5 cm at 12.5V w/ISO card (MIFARE UID Reader - 13.56MHz MIFARE UID)
Transponder Read only

LBR100/LBR200 105 x106 x18 mm
wall-mounting for European type of light switch box

Temperature Range:
Readers: -25 ~ 65 Deg C
Transponders: -55 ~ 80 Deg C

Note: The Specification is subject to change without notice.

Available versions:
LBR100 (RFID)Up to 20 cm read range
LBR200 (MIFARE) Up to 5cm read range

MIFARE is a registered Trademark of NXP B.V.