www.promageurope.com

Promag MF7 - MIFARE® UID Reader

13.56Mhz MIFARE reader. Medium range capability. Small footprint.

The Promag MF7 is a very high performance MIFARE reader. This well-designed reader is packed with technical features that have medium range capability and a small footprint. The MF7 reader is the best choice for system integrators because of its wide range of power inputs (between 5V to 18V DC). Even at 5 Volts (DC), the MF7 features a good reading range. The MF7 reader also comes with a variety of Three-In-One interface, RS-232, MSR ABA TK2 and Wiegand interfaces allowing it to integrate with a variety of applications, especially security access control.

Features:

* Reading distance: up to 50mm
* Frequency: 13.56 MHz
* Read MIFARE UltraLight® and MF1 Standard cards
* Three -In -One interface, with Wiegand, MSR ABA TK2 and RS232 interfaces
* Fast data transfer
* Weather resistant
* High data integrity
* User convenience
* Easy to install
* Available installed on metal surface

Specifications:

Electrical:
Power Requirements:5~18 Volts regulated DC at 200 mA typical. A linear regulator is recommended.

Interface:
- Wiegand
- MSR ABA Track2
- RS232
- Or special customized specifications.
Interface Cable: 90 cm
Read MIFARE standard cards for 1024/4096 byte and MIFARE UltraLight cards of EEPROM size 512bit for ISO 14443A
* Typical Maximum reading distance:Up to 50mm at 5~12V with MIFARE card In ideal conditions.
* Operating frequency: 13.56MHz standard
Read Only for Unique Serial Number / Unique Identifier ISO/IEC 14443 Type A
* External control Audio / Visual Indication: Internal LED and Buzzer

Mechanical:
* Dimensions: 83 (L) x 47 (W)x 16(H) mm
* Housing material: ABS

Environmental:
* Operating temperature Range: -10 to 60 Deg C.
* Operating relative Humidity: 10 ~ 90%.

Note: The Specification is subject to change without notice.

Applications:

Access control
Security system
ID card for admission control
Personal Identification

MIFARE is a registered Trademark of NXP B.V.